Friday, 26 April 2013

how to customize or change the power button action in windows 7 start menu to shutdown,switch user,log off,lock,sleep,restart or hibernate

We can change the Power button Action according to our requirement in Windows Seven Start menu As
  • Shut Down
  • Switch User
  • Log Off
  • Lock
  • Restart
  • Sleep
  • Hybernate

Process to change Power buton Action:
1. Right Click of mouse on an empy space of taskbar and Choose "properties"
2. On the "taskbar and start menu properties" window , Navigate to "Start Menu" tab.
3. On the "Power button Action" Choose the desired action from the drop down list.
4. Now "apply" the changes and click on "ok".
5. Now click on start button and see the changes.

RWAT(remove window activation technology)2.2 free download for windows 7 all version and home server 2008 and 2010(RemoveWAT)

* This is a free tool that will help you to remove Windows Activation Technology  completely from the OS.
* OS will still remain and show genuine status.
* It Will receive all updates (optional as well) from Microsoft and it will also pass the genuine check of Windows.
* No need of any additional process after patching.
* Its success rate is 100%.

It works on following operating systems:
Windows Seven Enterprise editions
Windows Seven Starter
Windows Seven Home Basic
Windows Seven Home Premium
Windows Seven Professional
Windows Seven ultimate
Windows server 2008
Window Home Server 2010

Note: Before using RWAT you need to uninstall the Windows Update KB971033 (if installed)otherwise it will not work

Download Link: http://adf.ly/LSU3C

How to correct system hangs during start up of windows xp vista and seven

Sometimes we face a problem like After logon on windows our system continues to hangs for sometimes (2 or 3 minute). At that time we are unable to access the start button as well as the taskbar. Mouse shows the busy symbol.This is due to a specific service named as "Background Intelligent Transfer". If we disable this service then only we will recover from this .
Steps:
1. Type "msconfig" without quotes on start search box or in RUN window and then hit enter.
2. A new window named "System Configuration" will be opened.
3. Now navigate to "Services" tab.
4. Search for Background Intelligent Transfer and uncheck it.

5. Now apply the changes and click on OK.
6. It will ask for reboot. Then just reboot your system and enjoy the changes.

latest winrar full version with key free download |how to make evaluation copy of win -rar registered

The process will show you how to make an Evaluation Copy of Win-Rar registered full version using the Crack. The crack is able to make any version of Win-Rar registered. The Evaluation Copy of Win-Rar works for 60 days after that it works but show an Error Message to activate.

Installation Process of Win-Rar Crack


1. Download and Install any version (latest) of Win-Rar.
2. Download the patch  or Crack from the below download link and Extract it to your desktop using any of RAR Archiever
3. Open Run Window and type "%appdata%" and click on "Ok".
4. it will open "C:\Users\[Your Use Name]\AppData\Roaming".
5. Open "Winrar" folder there.
5. Copy all the downloaded file and paste them on that Win-Rar Folder.
6. Now reboot your system and After reboot you will find that your Evaluation Copy of Win Rar is now Full Version.That is it.

Download Link 1    http://adf.ly/LwC78

How to hack remote computer using IP Address

How to hack remote computer using IP Address

cybercrime How to hack remote computer using IP Address
Literally, hacking is accessing something or somebody in internet without their permission or interest. While, speaking in summary, hacking is very easy job, it is like instead of using front door, finding the hidden door of a house and hijacking the precious things. Among all the hacking, hacking via IP address is one of the most common yet powerful beginning.
You may want to hack the website and put your advertisement there or grab some database information In this type of hacking, you are playing with the web server’s computer instead of the administrator’s computer. Because, www.website.com is hosted in separate web server rather than personal computer.
Another can be accessing your friend’s computer from your home. Again this is IP based and this is possible only when your friend’s computer is online. If it is off or not connected to internet then remote IP hacking is totally impossible.
Well, both of the hacking has the same process. Let’s summarize what we must do.
  1. Confirm the website or a computer you want to hack.
  2. Find or trace their IP address.
  3. Make sure that IP address is online
  4. Scan for open ports
  5. Check for venerable ports
  6. access through the port
  7. Brute-force username and password
Now let me describe in brief in merely basic steps that a child can understand it.
First, getting the IP address of victim.
To get the IP address of the victim website, ping for it in command prompt.
For example,
ping www.google.com
will fetch the IP address of Google.com
a How to hack remote computer using IP Address
This is how we can get the IP address of the victims website.
How about your friend’s PC? You can’t do www.yourfirend’sname.com, can you? Finding your friend’s IP address is little tough job, and tougher it is if he has dynamic IP address that keeps changing.
One of the widely used method to detect IP address of your friend is by chatting with him.
You might find this article helpful
  • How to get the IP address using MSN/Yahoo/Pidgin messenger
Now you got the IP address right? Is it online?
To know the online status just ping the IP address, if it is online it will reply.
If the IP address is online, scan for the open ports. Open ports are like closed door without locks, you can go inside and outside easily.
Use Advanced Port Scanner to scan all open and venerable ports.
b How to hack remote computer using IP Address
Now you’ve IP address and open port address of the victim, you can now use telnet to try to access them. Make sure that you’ve telnet enabled in your computer or install it from Control panel > Add remove programs > add windows components.
Now open command prompt and use telnet command to access to the IP address. Use following syntax for connection.
telnet [IP address] [Port]
c How to hack remote computer using IP Address
You’ll be asked to input login information.
d How to hack remote computer using IP Address
If you can guess the informations easily then it’s OK. Or you can use some brute-forcing tools like this one.
In this way you’ll able to hack remove computer using only IP address
enjoy the trick ! and pls do not harm anyone its just for fun....

how to change processor name in windows








This will change the name of the processor which is displayed on the system properties window..By this we will modify the old processor name with a new processor name or with our name or some of our desired text. By adding a new processor name the quality of the processor will not change it will only modify the name not its processing speed or capacity. By this you can also make some one fool by showing a new latest processor on your very old PC. This is just for enjoyment. Don't try to cheat others by this.

Steps:
1. open registry editor and Navigate to the following key.
 HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0

 2.Now in the right side pane you will find "ProcessorNameString".
   This will describe the current processor name in your system.
 3. Now double click on the mouse there and a new window having name "Edit string"will be opened.  or right click of mouse on "ProcessorNameString" and sect modify. Anew window with name Edit string will be opened.
5. Now modify the text on the "value data field" . The text will be displayed in place of your processor name in system properties screen.
6. Now press F5 or refresh click  on mouse.
7. Now you will find the modified processor name in system properties screen

WINDOWS XP GENUINE SERIAL KEY FOR ALL SERVICE PACKS 100% WORKING

KMTTB-68H32-8MKRK-GBHKT-RKCP6
ENJOY! THE TRICK

Friday, 12 April 2013

HOW TO CREATEBOOTABLEUSB PEN DRIVE USING COMMAND PROMPT

Steps To CreateBooTablePendrive 1. Insert your USB in your CPU (atleast of 4GB). And make sure that you retrieve all your files and folders from it since we are about to format it. 2. Now open “Command Prompt” on your system. Follow the path to open command prompt Start>All programs>Accessories>right click on Command Promptand selectrun as administrator . 3. Now as soon as Command Prompt window prompt type following command: -DISKPARTfollow byEnterandgrant permissionif your system promptforpermission. -LIST DISKfollows byEnter. This command will display list of disk available on your system. As you can see that I got 2 disks on my system from which my drive is disk no.1 4. Sorryfora big list of Command, but if you want to make your USB asbootablethentype the following command simultaneously follow byEnter. Don’t bother about the command just type it: - SELECT DISK 1 (Replace DISK 1 with your disk number) + ENTER - CLEAN + ENTER - CREATE PARTITION PRIMARY + ENTER - SELECT PARTITION 1 + ENTER - ACTIVE + ENTER - FORMAT FS=NTFS + ENTER (Formatting May Take Few Seconds) - ASSIGN + ENTER - EXIT + ENTER Now insert your window7 dvd and copy all contents of dvd to pen drive. then restart your computer and presr del or f2 for bios setting and choose removable device as first boot device.NOW YOU ARE DONE ENJOY THE TRICK!

Windows XP crack Key, Master Key

try these bro for the long life of XP... M8DPF-XT324-YBKK9-3VF8C-M2X78 CK74T-JPQCJ-V3CKP-X76BH-7CMVD VX2PV 2HB8K 32X3Q WX7WD HHBH3(master Key) Jpdr8-7x4g9-q226k-b7vyr-hfhmd G9j7j-2r2gv-y4mkh-kjbcd-tkfddd Jq4t4-8vm63-6wfbk-ktt29-v8966 Windows XP Home Edition OEM J9X8W-GKTQ9-K3TJ4-TF2KD-R3MBD QPMM3-JKQ88-9KJPM-HMH8P-XMQ2B v7bwd-g9yr6-9fg87-8q2hv-yjgtg

Manually crash Windows-XP

Windows-XP has a "feature" (???) with which it is possible to manually crash a system by simply holding the right CTRL key and pressing the"Scroll Lock" key twice. This feature can be turned on by the following steps: 1. Start regedit. (If you are unfamiliarwith regedit, please refer to this FAQ ) 2. Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\i8042prt\Parameters 3. Create a new DWORD value and name it CrashOnCtrlScroll 4. Right-click on this newly created value and click on Modify 5. Enter 1 in the Value data field and click on OK. 6. Close regedit and reboot your system. 7. Now you can blue screen (crash) your system by holding the right CTRL key and pressing "Scroll Lock" twice. Note: Your system may reboot or show a blue screen whenever this crash is initiated. If your system reboots afterinitiating the crash, and you want to see the blue screen, follow these steps: 1. Go to Control Panel > System 2. Click on the Advanced tab 3. Under Startup and Recovery , click the Settings button. 4. Under System failure , uncheck the option Automatically restart . Happy crashing...

List of Intel microprocessors

This generational and chronological list of Intel microprocessors attemptsto present all of Intel 's processors from the pioneering 4-bit 4004 (1971) to the present high-end offerings, which include the 64-bit Itanium 2 (2002), Intel Core 2 , and Xeon 5100 and 7100 series processors (2006). Concise technical data is given for each product. Contents 1 The 4-bit processors 1.1 Intel 4004 1.2 Intel 4040 2 The 8-bit processors 2.1 8008 2.2 8080 2.3 8085 3 Microcontrollers 3.1 Intel 80483.2 Intel 8051 3.3 MCS-96 Family 4 The bit-slice processor 4.1 3000 Family 5 The 16-bit processors: MCS-86 family 5.1 8086 5.2 8088 5.3 80186 5.4 80188 5.5 80286 6 32-bit processors: the non-x86 microprocessors 6.1 iAPX 432 6.2 i960 aka 80960 6.3 i860 aka 80860 6.4 XScale 7 32-bit processors: the 80386 range 7.1 80386DX 7.2 80386SX 7.3 80376 7.4 80386SL 7.5 80386EX 8 32-bit processors: the 80486 range 8.1 80486DX 8.2 80486SX 8.3 80486DX2 8.4 80486SL 8.5 80486DX4 9 32-bit processors: P5 microarchitecture 9.1 Original Pentium 9.2 Pentium with MMX Technology 10 32-bit processors: P6/Pentium M microarchitecture 10.1 Pentium Pro 10.2 Pentium II 10.3 Celeron (Pentium II-based) 10.4 Pentium III 10.5 Pentium II and III Xeon 10.6 Celeron (Pentium III Coppermine-based) 10.7 Celeron (Pentium III Tualatin-based) 10.8 Pentium M 10.9 Celeron M 10.10 Intel Core 10.11 Dual-Core Xeon LV 11 32-bit processors: NetBurst microarchitecture 11.1 Pentium 4 11.2 Xeon 11.3 Mobile Pentium 4-M 11.4 Pentium 4 EE 11.5 Pentium 4E 11.6 Pentium 4F 12 64-bit processors: IA-64 12.1 Itanium 12.2 Itanium 2 13 64-bit processors: Intel 64 – NetBurst microarchitecture 13.1 Pentium 4F 13.2 Pentium D 13.3 Pentium Extreme Edition 13.4 Xeon 14 64-bit processors: Intel 64 – Core microarchitecture 14.1 Xeon 14.2 Intel Core 2 14.3 Pentium Dual Core 14.4 Celeron 14.5 Celeron M 15 64-bit processors: Intel 64 – Nehalem microarchitecture 15.1 Intel Pentium 15.2 Core i3 15.3 Core i5 15.4 Core i7 15.5 Xeon 16 64-bit processors: Intel 64 – Sandy Bridge / Ivy Bridge microarchitecture 16.1 Celeron 16.2 Pentium 16.3 Core i3 16.4 Core i5 16.5 Core i7 17 Intel 805xx product codes 18 Intel 806xx product codes 19 See also 20 References 21 External links [ edit ] The 4-bit processors [ edit ] Intel 4004 first single-chip microprocessor *. Introduced November 15, 1971 *. Clock rate 740 kHz [ 1 ] *. 0.07 MIPS *. Bus Width 8 bits (multiplexed address/data due to limited pins) *. PMOS *. Number of Transistors 2,300 at 10 µm *. Addressable Memory 640 bytes *. Program Memory 4 KB (4 KB ) *. One of the earliest Commercial Microprocessors ( cf . Four Phase Systems AL1 , F14 CADC ) *. Originally designed to be used in Busicom calculator MCS-4 Family: *. 4004 – CPU *. 4001 – ROM & 4-Bit Port *. 4002 – RAM & 4-Bit Port *. 4003 – 10-Bit Shift Register *. 4008 – Memory+I/O Interface *. 4009 – Memory+I/O Interface [ edit ] Intel 4040 MCS-40 Family: *. 4040 – CPU *. 4101 – 1024-bit (256 × 4) Static RAM with separate I/O *. 4201 – 4 MHz Clock Generator *. 4207 – General Purpose Byte I/O Port *. 4209 – General Purpose Byte I/O Port *. 4211 – General Purpose Byte I/O Port *. 4265 – Programmable General Purpose I/O Device *. 4269 – Programmable Keyboard Display Device *. 4289 – Standard Memory Interface for MCS-4/40 *. 4308 – 8192-bit (1024 × 8) ROM w/4-bit I/O Ports *. 4316 – 16384-bit (2048 × 8) Static ROM *. 4702 – 2048-bit (256 × 8) EPROM *. 4801 – 5.185 MHz Clock Generator Crystal for 4004/4201A or 4040/4201A [ edit ] The 8-bit processors [ edit ] 8008 *. Introduced April 1, 1972 *. Clock rate 500 kHz (8008–1: 800 kHz) *. 0.05 MIPS *. Bus Width 8 bits (multiplexed address/data due to limited pins) *. Enhancement load PMOS logic *. Number of Transistors 3,500 at 10µm *. Addressable memory 16 KB *. Typical in early 8-bit microcomputers, dumb terminals, general calculators, bottling machines *. Developed in tandem with 4004 *. Originally intended for use in the Datapoint 2200 microcomputer *. Key volume deployment in Texas Instruments 742 microcomputer in>3,000 Ford dealerships [ edit ] 8080 *. Introduced April 1, 1974 *. Clock rate 2 MHz (very rare 8080B: 3 MHz) *. 0.29 MIPS [ 2 ] *. Bus Width 8 bits data, 16 bits address *. Enhancement load NMOS logic *. Number of Transistors 6,000, 6μm *. Assembly language downwards compatible with 8008. *. Addressable memory 64 KB *. Up to 10X the performance of the 8008 *. Used in the Altair 8800 , Traffic lightcontroller , cruise missile *. Required six support chips versus 20 for the 8008 [ edit ] 8085 *. Introduced March 1976 *. Clock rate 3 MHz [ 3 ] *. 0.37 MIPS *. Bus Width 8 bits data, 16 bits address *. Depletion load NMOS logic *. Number of Transistors 6,500 at 3µm *. Binary compatible downwards with the 8080. *. Used in Toledo scales . Also was used as a computer peripheral controller – modems, hard disks, printers, etc. *. CMOS 80C85 in Mars Sojourner , Radio Shack Model 100 portable . *. High level of integration, operating for the first time on a single 5-volt power supply, from 12 volts previously. Also featured serial I/O, 3 maskable interrupts , 1 non-maskable interrupt, 1 externally expandable interrupt w/[8259], status, DMA. *. MCS-85 family contains processors and peripherals [ edit ] Microcontrollers They are ICs with CPU, RAM, ROM (or PROM or EPROM), I/O Ports, Timers & Interrupts [ edit ] Intel 8048 *. Single accumulator Harvard architecture MCS-48 family: *. 8020 – Single-Component 8-Bit Microcontroller *. 8021 – Single-Component 8-Bit Microcontroller *. 8022 – Single-Component 8-Bit Microcontroller With On-Chip A/D Converter *. 8035 – Single-Component 8-Bit Microcontroller *. 8039 – Single-Component 8-Bit Microcontroller *. 8040 – Single-Component 8-Bit Microcontroller *. 8041 – Universal Peripheral Interface 8-Bit Slave Microcontroller *. 8641 – Universal Peripheral Interface 8-Bit Slave Microcontroller *. 8741 – Universal Peripheral Interface 8-Bit Slave Microcontroller *. 8042 – Universal Peripheral Interface 8-Bit Slave Microcontroller *. 8742 – Universal Peripheral Interface 8-Bit Slave Microcontroller *. 8243 – Input/Output Expander *. 8048 – Single-Component 8-Bit Microcontroller *. 8048 – Single-Component 8-Bit Microcontroller *. 8748 – Single-Component 8-Bit Microcontroller *. 8048 – Single-Component 8-Bit Microcontroller *. 8049 – Single-Component 8-Bit Microcontroller *. 8749 – Single-Component 8-Bit Microcontroller *. 8050 – Single-Component 8-Bit Microcontroller [ edit ] Intel 8051 *. Single accumulator Harvard architecture MCS-51 Family: *. 8031 – 8-Bit Control-Oriented Microcontroller *. 8032 – 8-Bit Control-Oriented Microcontroller *. 8044 – High Performance 8-Bit Microcontroller *. 8344 – High Performance 8-Bit Microcontroller *. 8744 – High Performance 8-Bit Microcontroller *. 8051 – 8-Bit Control-Oriented Microcontroller *. 8052 – 8-Bit Control-Oriented Microcontroller *. 8054 – 8-Bit Control-Oriented Microcontroller *. 8058 – 8-Bit Control-Oriented Microcontroller *. 8351 – 8-Bit Control-Oriented Microcontroller *. 8352 – 8-Bit Control-Oriented Microcontroller *. 8354 – 8-Bit Control-Oriented Microcontroller *. 8358 – 8-Bit Control-Oriented Microcontroller *. 8751 – 8-Bit Control-Oriented Microcontroller *. 8752 – 8-Bit Control-Oriented Microcontroller *. 8754 – 8-Bit Control-Oriented Microcontroller *. 8758 – 8-Bit Control-Oriented Microcontroller *. 80151 – 8-Bit Control-Oriented Microcontroller *. 83151 – 8-Bit Control-Oriented Microcontroller *. 87151 – 8-Bit Control-Oriented Microcontroller *. 80152 – 8-Bit Control-Oriented Microcontroller *. 83152 – 8-Bit Control-Oriented Microcontroller *. 80251 – 8-Bit Control-Oriented Microcontroller *. 87251 – 8-Bit Control-Oriented Microcontroller [ edit ] MCS-96 Family *. 8094 – 16-Bit Microcontroller (48-Pin ROMLess Without A/D) *. 8095 – 16-Bit Microcontroller (48-Pin ROMLess With A/D) *. 8096 – 16-Bit Microcontroller (68-Pin ROMLess Without A/D) *. 8097 – 16-Bit Microcontroller (68-Pin ROMLess With A/D) *. 8394 – 16-Bit Microcontroller (48-Pin With ROM Without A/D) *. 8395 – 16-Bit Microcontroller (48-Pin With ROM With A/D) *. 8396 – 16-Bit Microcontroller (68-Pin With ROM Without A/D) *. 8397 – 16-Bit Microcontroller (68-Pin With ROM With A/D) *. 8794 – 16-Bit Microcontroller (48-Pin With EROM Without A/D) *. 8795 – 16-Bit Microcontroller (48-Pin With EROM With A/D) *. 8796 – 16-Bit Microcontroller (68-Pin With EROM Without A/D) *. 8797 – 16-Bit Microcontroller (68-Pin With EROM With A/D) *. 8098 – 16-Bit Microcontroller *. 8398 – 16-Bit Microcontroller *. 8798 – 16-Bit Microcontroller *. 80196 – 16-Bit Microcontroller *. 83196 – 16-Bit Microcontroller *. 87196 – 16-Bit Microcontroller *. 80296 – 16-Bit Microcontroller [ edit ] The bit-slice processor [ edit ] 3000 Family Intel D3002 Introduced in the third quarter of 1974, these components used bipolar Schottky transistors. Each component implemented two bits ofa processor function; packages could be interconnected to build a processor with any desired word length. Members of the family: *. 3001 – Microcontrol Unit *. 3002 – 2-bit Arithmetic Logic Unit slice *. 3003 – Look-ahead Carry Generator *. 3205 – High-performance 1 Of 8 Binary Decoder *. 3207 – Quad Bipolar-to-MOS Level Shifter and Driver *. 3208 – Hex Sense Amp and Latch for MOS Memories *. 3210 – TTL-to-MOS Level Shifter and High Voltage Clock Driver *. 3211 – ECL-to-MOS Level Shifter andHigh Voltage Clock Driver *. 3212 – Multimode Latch Buffer *. 3214 – Interrupt Control Unit *. 3216 – Parallel,Inverting Bi-Directional Bus Driver *. 3222 – Refresh Controller for 4K NMOS DRAMs *. 3226 – Parallel, Inverting Bi-Directional Bus Driver *. 3232 – Address Multiplexer and Refresh Counter for 4K DRAMs *. 3242 – Address Multiplexer and Refresh Counter for 16K DRAMs *. 3245 – Quad Bipolar TTL-to-MOS Level Shifter and Driver for 4K *. 3246 – Quad Bipolar ECL-to-MOS Level Shifter and Driver for 4K *. 3404 – High-performance 6-bit Latch *. 3408 – Hex Sense Amp and Latch for MOS Memories Bus Width 2* n bits data/address (depending on number n of slices used) [ edit ] The 16-bit processors: MCS-86 family [ edit ] 8086 *. Introduced June 8, 1978 *. Clock rates: *. 5 MHz with 0.33 MIPS [ 3 ] *. 8 MHz with 0.66 MIPS *. 10 MHz with 0.75 MIPS *. The memory is divided into odd and even banks; it accesses both banks concurrently to read 16 bits of data in one clock cycle *. Bus Width 16 bits data, 20 bits address *. Number of Transistors 29,000 at 3µm *. Addressable memory 1 megabyte *. Up to 10X the performance of 8080 *. Used in portable computing, and in the IBM PS/2 Model 25 and Model 30 . Also used in the AT&T PC6300 / Olivetti M24 , a popular IBM PC-compatible (predating the IBM PS/2 line). *. Used segment registers to access more than 64 KB of data at once, which many programmers complained made their work excessively difficult. [ citation needed ] [ edit ] 8088 *. Introduced June 1, 1979 *. Clock rates: *. 5 MHz with 0.33 MIPS *. 8 MHz with 0.66 MIPS [ 3 ] *. Internal architecture 16 bits *. External bus Width 8 bits data, 20 bits address *. Number of Transistors 29,000 at 3µm *. Addressable memory 1 megabyte *. Identical to 8086 except for its 8-bit external bus (hence an 8 instead of a 6 at the end) *. Used in IBM PCs and PC clones [ edit ] 80186 *. Introduced 1982 *. Clock rates *. 6 MHz with > 1 MIPS *. Number of Transistors 29,000 at 2µm *. Included two timers, a DMA controller , and an interrupt controller on the chip in addition tothe processor (these were at fixed addresses which differed from the IBM PC, making it impossible to build a 100% PC-compatible computer around the 80186). *. Added a few opcodes and exceptions to the 8086 design; otherwise identical instruction set to 8086 and 8088. *. Used mostly in embedded applications – controllers, point-of-sale systems, terminals, and the like *. Used in several non-PC-Compatible MS-DOS computers including RM Nimbus, Tandy 2000 , and CP/M 86 Televideo PM16 server *. Later renamed the iAPX 186 [ edit ] 80188 *. A version of the 80186 with an 8-bit external data bus *. Later renamed the iAPX 188 [ edit ] 80286 *. Introduced February 1, 1982 *. Clock rates: *. 6 MHz with 0.9 MIPS *. 8 MHz, 10 MHz with 1.5 MIPS *. 12.5 MHz with 2.66 MIPS *. 16 MHz, 20 MHz and 25 MHz available. *. Bus Width: 16 bits data, 24 bits address. *. Included memory protection hardware to support multitasking operating systems with per-process address space *. Number of Transistors 134,000 at 1.5 µm *. Addressable memory 16 MB *. Added protected-mode features to 8086 with essentially the same instruction set *. 3–6X the performance of the 8086 *. Widely used in IBM-PC AT and AT clones contemporary to it [ edit ] 32-bit processors: the non-x86 microprocessors [ edit ] iAPX 432 *. Introduced January 1, 1981 as Intel's first 32-bit microprocessor *. Multi-chip CPU; Intel's first 32-bit microprocessor *. Object/capability architecture *. Microcoded operating system primitives *. One terabyte virtual address space *. Hardware support for fault tolerance *. Two-chip General Data Processor (GDP), consists of 43201 and 43202 *. 43203 Interface Processor (IP) interfaces to I/O subsystem *. 43204 Bus Interface Unit (BIU) simplifies building multiprocessor systems *. 43205 Memory Control Unit (MCU) *. Architecture and execution unit internal data base paths 32 bit *. Clock rates: *. 5 MHz *. 7 MHz *. 8 MHz [ edit ] i960 aka 80960 *. Introduced April 5, 1988 *. RISC -like 32-bit architecture *. Predominantly used in embedded systems *. Evolved from the capability processor developed for the BiiN joint venture with Siemens *. Many variants identified by two-letter suffixes. [ edit ] i860 aka 80860 *. Introduced February 27, 1989 *. RISC 32/64-bit architecture, with floating point pipeline characteristics very visible to programmer *. Used in the Intel iPSC/860 Hypercube parallel supercomputer *. Mid-life kicker in the i870 processor (primarily a speed bump,some refinement/extension of instruction set) *. Used in the Intel Delta massively parallel supercomputer prototype, emplaced at California Institute of Technology *. Used in the Intel Paragon massivelyparallel supercomputer, emplaced at Sandia National Laboratory [ edit ] XScale *. Introduced August 23, 2000 *. 32-bit RISC microprocessor based on the ARM architecture *. Many variants, such as the PXA2xx applications processors, IOP3xx I/Oprocessors and IXP2xxx and IXP4xx network processors. [ edit ] 32-bit processors: the 80386 range [ edit ] 80386DX *. Introduced October 17, 1985 *. Clock rates: *. 16 MHz with 5 MIPS *. 20 MHz with 6 to 7 MIPS, introduced February 16, 1987 *. 25 MHz with 7.5 MIPS, introduced April 4, 1988 *. 33 MHz with 9.9 MIPS (9.4 SPECint92 on Compaq/i 16K L2), introduced April 10, 1989 *. Bus Width 32 bits data, 32 bits address *. Number of Transistors 275,000 at 1µm *. Addressable memory 4 GB *. Virtual memory 64 TB *. First x86 chip to handle 32-bit data sets *. Reworked and expanded memory protection support including pagedvirtual memory and virtual-86 mode, features required at the time by Xenix and Unix . This memory capability spurred the development and availability of OS/2 and is a fundamental requirement for modern operating systems like Linux , Windows , and Mac OS . *. Used in desktop computing [ edit ] 80386SX *. Introduced June 16, 1988 *. Clock rates: *. 16 MHz with 2.5 MIPS *. 20 MHz with 3.1 MIPS, introduced January 25, 1989 *. 25 MHz with 3.9 MIPS, introduced January 25, 1989 *. 33 MHz with 5.1 MIPS, introduced October 26, 1992 *. Internal architecture 32 bits *. External data bus width 16 bits *. External address bus width 24 bits *. Number of Transistors 275,000 at 1µm *. Addressable memory 16 MB *. Virtual memory 32 GB *. Narrower buses enable low-cost 32-bit processing *. Used in entry-level desktop and portable computing

How to Set Your Desired things as icon, text color and Background Image of a pen drive

A.Using “Desktop.ini” Hack to Set Wallpaper as Background Image and give a particular text color of the pen drive.The process is very similar to add a background and text color in a Windows folder. Also See: How to set our desired photo as a folder background image Now open Notepad and paste following code: [ ExtShellFolderViews] {BE098140-A513-11D0-A3A4-00C04FD706EC} = {BE098140-A513-11D0-A3A4-00C04FD706EC} [{BE098140-A513-11D0-A3A4-00C04FD706EC}] Attributes=1 IconArea_Image=image name IconArea_Text=0x00000000 Now change "image name" with the wallpaper which you want to set as background. Suppose the wallpaper is “xxx.jpg", then the code will be as following [ExtShellFolderViews] {BE098140-A513-11D0-A3A4-00C04FD706EC} = {BE098140-A513-11D0-A3A4-00C04FD706EC} [{BE098140-A513-11D0-A3A4-00C04FD706EC}] Attributes=1 IconArea_Image=xxx.jpg IconArea_Text=0x00000000 NOTE:- For adding xxx.jpg wallpaper as pendrives backgrounds it should be present inside the pen drive. "IconArea_Text" stands for the text color, you can change it to white, yellow, blue, black or any other color. You just need to know the hexa-decimal number of the color andthen replace the code in"IconArea_Text" section. A few most used color codes are as follows: Black - 0x00000000 White - 0x00FFFFFF Green - 0x0000FF00 Blue - 0x00FF0000 Purple - 0x00C000C0 Red - 0x000000FF Yellow - 0x0000FFFF Indigo - 0x00FFFF00 Now save the notepad file as “Desktop.ini” (excluding quotes) and save it inside the pen drive. Now close and reopen the pen drive.you can enjoy the change. B. for adding a personal icon to pen drive , you have to hack a “autorun.inf” fileNow open Notepad and paste following code: [autorun] OPEN=an.exe file name ICON=an .ico file name LABEL=pendive name “an.exe file name” is stands for a file which you want to execute when youpin the pen drive to your system. You can change it. Suppose you want to execute “xxx.exe” when you pin the pendrive to your system. Then the code will be like: [auto run] OPEN=xxx.exe ICON=an .ico file name LABEL=pendive name “an.ico file name” is stands for the icon which you want to see when youpin the pen drive to your system You can change it. Suppose you want to see “xxx.ico” when you pin the pendrive to your system. Then the code will be like: [autorun] OPEN=xxx.exe ICON=xxx.ico LABEL=pendive name “Pendive name” stands for the name of the pendrive. Suppose name of your pen drive is “MIHIRBABU”. Then the code will be like: [autorun] OPEN=xxx.exe ICON=xxx.ico LABEL=MIHIRBABU Now save this note pad file as “autorun.inf” (excluding quotes) inside the pen drive. NOTE: For change of icon the icon file (here “xxx.ico”) should present inside the pen drive. Now remove the pen drive and pin it and enjoy the change. NOTE: If you have installed an antivirus which can delete or block autorun.inf file. Then autorun.inf file will be blocked and you are unable to see the change.

How to Reset - Remove - Bypass a BIOS or CMOS Password without using any software

This information is intended for experienced users. It is not Intended for basic users, hackers, or computer thieves. Please do not tryany Of following procedures if you arenot familiar with computer hardware.We'll Not be responsible for the use or misuse of this information, including Personal injury, loss of data or hardware damage. So use it at your own risk. BIOS passwords are used to add some extra security to computers. You can either Set a password to prevent access to BIOS settings or to prevent PC from booting.But sometimes this extra security might become a pain when you forget the BIOS Password or someone changes your system BIOSpassword intentionally.But there is noneed to worry. There are many known ways to reset / remove / Bypass the password: a) By removing the CMOS battery b :) By using the motherboard jumper c :) By using MS DOS command d :) By using Backdoor BIOS password Also See: How to break an Administrator Password in Windows A.By Removing the CMOS Battery: Almost all motherboards use a small coin sized CMOS battery to store all BIOS Settings along with the password. To reset the password, unplug the PC, open the Cabinet and remove the CMOS battery for approx. 15-30 minutes and then put it Back. It'll reset all BIOS settings as well as the password and you'll need to Re-enter all settings.If it fails, then try to remove the battery for at least one hour. B.By Using the Motherboard Jumper: Almost all motherboards contain a jumper that can clear all CMOS settingsalong With the BIOS password. The location of this jumper varies depending upon the Motherboard brand. You should read your motherboard manual to check its Location. If you don't have the manualthen look for the jumpers near the CMOS Battery. Most of the manufacturers label the jumper as CLR, CLEAR, CLEAR CMOS, Etc.When you find the jumper, look carefully. There will be 3 pins and the jumper Will be joining the center pin to either left or right pin. What you need to do, Is removing the jumper and join the center pin to the opposite pin. E.g. if the jumper joins center pin to left pin, then remove it and join center pin to right Pin. Now wait for a few seconds and then again remove the jumper and join the Center pin to left pin.Make sure to turn the PC off beforeopening the cabinet and resetting the Jumper. C.By Using MS DOS Command: This method works only if you have access to the system when it’s turned on Because this method requires MS DOS. Open Command Prompt from Programs menu and Provide following commands one bye one: debug o 70 2E o 71 FF quit NOTE: The first character in the above commands is "O" and not the number 0.After providing the above commands, restart your system and it should reset the CMOS Settings along with the BIOS password. If you are curious to know how it works? Then let me explain the abovecommands: In this method we are using the Debug tool of MS DOS. The"O" character present At first in these commands, outputs the values to IO ports. The number 70 and 71 Are port numbers which are used to access CMOS memory. By providing FF value we are telling CMOS that there is an invalid checksum and it resets the CMOS Settings as well as BIOS password. D.By Using Backdoor BIOS Password: Some BIOS manufacturer put a backdoor password in BIOS which always works Irrespective of what password you have set in BIOS. It’s a master password which Is used for testing and troubleshooting purposes. AMI BIOS Passwords: A.M.I. AAAMMMIII AMI?SW AMI_SW AMI BIOS CONDO HEWITT RAND LKWPETER MI Oder PASSWORD AWARD BIOS Passwords: 01322222 589589 589721 595595 598598 ALFAROME ALLy aLLy aLLY ALLY aPAf _award award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC PHOENIX BIOS Passwords: BIOS CMOS phoenix PHOENIX Misc Common Passwords: ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj Other Manufacturer BIOS Passwords: Biostar - Biostar Compaq - Compaq Dell - Dell Enox - xo11nE Epox - central Freetech - Posterie IWill - iwill Jetway - spooml Packard Bell - bell9 QDI - QDI Siemens - SKY_FOX TMC - BIGO Toshiba - Toshiba VOBIS & IBM - merlin NOTE: All these passwords are case-sensitive and are changed from time to time by manufacturers.

How to remove write protection from the USB disk in Windows

Sometimes we get a problem on our PC that when we try to copy something to our USB disk it shows anerror that "The disk is write protected" . If the problem is due to viruses or any error in Windows registry then it can be rectified. But someone has intentionally make it write protected by adding a passwordthen it will not work. Also Check: How to enable disable the copy/move option to USB drive Process: 1. Open registry Editor. Also Check: How to open Registry Editor and Group Policy Editor 2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies 3. Create a new key " WriteProtect " there. 4. Change the Value of write protect key to 0 In the Value Data Box. Press OK 5. Exit Registry 6. Restart your computer and re-connect your USB pen drive on yourcomputer. That is it.

How to play all the Audio and Video format in Windows Media Player

By default Windows Media player is unable to play all type of Videos and Audios. So we install other media players. But if we install a 3rd party plugin named as K-Lite-Codec-Pack then Windows Media Player will also able to play all type of Videos and Audios. After Installation Of K-lite-Codec- Pack windows Media player will be able to play the below mentioned Media Formats. Also Check: How to download the bestquality video in torrent download by showing the file name Video FIle: AVI (.avi .divx .amv), Matroska (.mkv .webm), MP4 (.mp4.m4v . mp4v .mpv4) , Quick Time (.hdmov .mov), Flash Video (.flv .f4v), MPEG (.mpeg .mpg .mp2v .mpv2 .m1v m2v .m2p .mpe .evo), MPEGTS (.ts.m2ts .mts .m2t .tp .tps .trp .rec) 3GP (.3gp .3gpp .3g2 .3gp2), Windows MEdia (.wmv .asf), Digital Video (.dv), DVD file (.ifo .vob), Blue RAy file (.bdmv .mpls), Real MEdia (.rm .rmvb) Audio FIle: Audi File Extension (.mp3), WAVE (.wav .cda), Windows MEdia Audio (.wma), OGG (.ogg .oga), Matroska (.mka), MPEG4 Audio (.m4a.aac), FLAC (.flac), WavPAck (.wv), MusePAck (.mpc), Monkeys Audio (.ape .apl), Optim Frog (.ofr .ofs), TAK (.tak), Opus (.opus), Apple Loss Audio Codec (.alac), True Audio (.ta), AC3 (.ac3), DTS (.dts) AIFF (.aif .aiff .aifc), Core audio Format (.caf), AMR (.amr) , Real Audio (.ra), Speex (.spx) Download Link : http://www.filehippo.com/download_klite_codec_pack / Installation Process OF K-Lite-Codec-Pack 1. Right Click on the application and " Run as Administrator " 2. Click on " Next " 3. Choose " Advanced Mode " and Select" next ". 4. It will show the Installation path. Click " Next " 5. Now it will show the installation component. Unchecked the option " Player " so that classic window 123 player will not installed to play all audio and video and Windows Media Player will be able to play all the videos. Again Next -> Next -> 6. Uncheck the option " Reset all the setting to their defaults ". Click " Next " -> NEXT 7. Now the Player Association Window will be open. Checked in"Windows Media Player" and Click " next ". 8. Now the File association for the Windows Media Player will open. Choose " Select all audio " and " Select all video " and click " Next " 9. Now thumbnail Association Window will open. Just select " Select all " and click "next." 10. Now on the speaker configuration Window select your speaker configuration and click " next " 11. Follow the instruction and complete the rest of the installation process. Note: The above steps are from K-Lite codec pack v 9.7.4. The process amy varies for other version. But you have to keep in mind about the program and file association and uncheck the option of installation of other.

How to create shortcut for shutdown, Restart and Logoff or Single click shutdown restart andlogoff in Windows XP, Vista and Seven

This process is done by creating or by hacking a BAT file. For this open notepad and type:- shutdown -s -c "Shutting down!" -t 3 It tells your computer to shutdown after waiting for 3 seconds while the System Shutdown Window will display text "Shutting down!" above in the Message area. If you want to change the system shutdown delay time just changes 3 to another number. System will take that Number as delay time in seconds. If you want to display your name before shutdown then change"Shutting down!" to your name including quote (e.g. shutdown -s -c"MIHIRBABU" -t 3. It will display MIHIRBABU before shutdown) If you want logoff or restart instead ofshutdown then just replace “-s” with “-l” or “-r”. -l = Log off the current user. -r = Shut down and restart (reboot) the computer. -s = Shut down the computer. Save this notepad file with any name with extension .bat (suppose “xxx.bat”) any where in your computer. After saving this when anyone double click or run or execute this “xxx.bat” file computer will execute this BAT fileand follow the user’s command. In some cases when we logged in as alocal user instead of Administrator, then ; when we double click the bat file system is not shutdown. Then right click of mouse on that file and click on "Run as administrator"

How to create automatic login without asking for password in windows Xp, Vista and Seven

This will change the windows log in process. After the boot screen no loginscreen will appear. Even if there is a password on your system, it will not ask for the password but log in automatically. Process:- 1. Type " control userpasswords2 " without quotes on RUN window or in the start search box and hit enter. 2. A new window " User Accounts" willbe opened. 3. Now navigate to users tab. 4. Here you will find " Users must entera user name and password to use this computer ". 5. If you uncheck this then it will be logged in automatically. And if you check in this then it will ask for the password. 6. A dialog will allow setting a user and password to be used automatically. 7. Now apply all the changes and PressOK. 8. Now close all the open window andreboot your system and Enjoy the changes.

How to create a hidden and unsearchable file in windows XP,Vista and Seven

If we change the properties of the file to hidden (right click on the file->properties- >tick hidden) Then properties of the file become hidden. But if show hidden files & folder is enable (folder option- > view->hidden files & folder - > tick show hidden files & folder) then it shows that file. This process is not reliable. We have to change the attribute of the file to hidden and unsearchable bycommand prompt. Suppose there is a file “”xxx.jpg” inside the folder “rock” in d: drive. We have to make hidden and Unsearchable to that file using command “attrib +s +h” in command prompt. Also See: How to create a hidden and unsearchable folder in Windows XP, Vista and Seven Step1:- Open command prompt (window logo key + R- > type “cmd”-> hit enter) E.g. It will display the command prompt screen. C :\> Step2:- Type attrib +s +h [file path] ->hit enter e.g. C :\> attrib +s +h d:\rock\xxx.jpg This will make the file “xxx.jpg” hidden and unsearchable NOTE:- 1. We can use that file by typing the full path of the file (i.e. d:\rock\xxx.jpg) in the Address bar. 2. For change its attribute to unhidden and searchable use the command attrib “–s –h” in step2. e.g. C :\> attrib -s -h d:\rock\xxx.jpg NOTE:- 1. +s- makes the attribute of the file & folder to system. 2. +h- makes the attribute of the file &folder to hidden. 3. –s- removes the attribute of the file& folder from system to General file. 4. –h- makes the attribute of the file &folder to un hidden.

How to create a con folder without using Command prompt (cmd)

This is the very simple trick and just a combination of my two previous article. How to create a folder with any name and How to create a folder with no name or with a blank space In the same Process we can also create a folder with the following names. To do so just change CON with these folder names in step-3 *. Prn *. Nul *. Lpt1 *. Lpt2 *. Lpt3 *. Lpt4 *. Lpt5 *. Lpt6 *. Lpt7 *. Lpt8 *. Lpt9 *. Com1 *. Com2 *. Com3 *. Com4 *. Com5 *. Com6 *. Com7 *. Com8 *. Com9 These are the reserved name of by windows So we can not create a folder with these names by simple folder creation method. Process to create a con folder without using command Prompt 1. Create a folder or rename a folder. 2. Now press " Alt " and type 255 (using numpad that are present at theright side of keyboard). 3. Then type CON and press Enter. 4. Now a folder with the name CON will be created. 5. Theis folder can be easily deleted. But in my Previous article How to create a con folder or Create a folder with any name .The created CON foldercan not be easily deleted.

How to add a logo or your photo to a video file in windows

Many people like to add their official logo or their URL or a photo to video files. I will show you how to add a professional looking transparent logo to your video files using a free program called VirtualDub. Download Link: http://www.virtualdub.org/ First download the virtualdub software. Then follow the process. The below process and the screenshot are described on Virtual dub 1.6.9,.Youcan download the similar version or any updated version. The process is same for all. Process:- 1. Prepare your logo by opening your favorite image editor and making a new image file, try to use a suitable dimensions and suitable colour that will look good in the final video also make it as simple and as small as possible. 2. Save the image file as .bmp or .jpg or .png 3.Open VirtualDub, Drag and Drop your video on it. 4. Now Click on Video > Full processing mode. (enable) 5. Now Click Video > Filters or (Ctrl + F). 6. In the Filters window, click Add. 7. In the "Add Filter" window scroll down to logo and double click on it or choose it and click Ok. 8. In the "filter: logo" window click"Logo image" and browse to the logo image you have created. 9. Check the three check boxes:"Enable per-pixel alpha blending…","Use premultiplied alpha…" and "Use gray channel…". 10. In the "Alpha image" browse to the same image file again. 11. Click the "Show preview" button, you should now see your logo on the video. 12. Change the "X offset" and "Y offset" to change the position of your logo. 13. You can also change the Opacity value if you like your logo to be semi transparent, you should see the results immediately in the "Filter preview" window. 14. Click Ok twice to return to the main window, press (Ctrl + P) or click Video > Compression to choose a video compression - like Divx . 15. Now press F7 to save the file. Now you will find the final result of the video file.

How to add "Change Wallpaper" option to context menu or simply right click of mouse on anempty space of windows XP, Vista and Seven (w7) without using any 3rd party software

Wallpaper is the photo or video that isshown in our desktop Screen. By the below process we can find the wallpaper setting as a shortcut on the windows context menu. Before goingthrough the process you must make a back up of your Windows Registry. Also See: Process to make back up of the Windows Registry Now open your notepad or any other text editor and enter the following information:- Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Directory\Background\shell] @="none" [HKEY_CLASSES_ROOT\Directory\Background\shell\Change Wallpaper] [HKEY_CLASSES_ROOT\Directory\Background\shell\Change Wallpaper\command] @="control desk.cpl,,@desktop" Note: Please make sure that the first line (the one starting with "Windows Registry Editor..." appears in the text file. Now save the notepad file anywhere on your computer and give it a .reg extension.(suppose xxx.reg).Now you need to install that registry file to Windows registry.. Also See: How to insert a registry file to Windows Registry After installing the registry Now reboot your computer and Enjoy the change.